Nowadays, computer video and voice chat is not unfamiliar to all of us, but sometimes when a trial is going on or when we are just chatting with relatives in a distant place, I suddenly can’t hear the other party’s voice, and occasionally intermittently, which really annoying. Whenever I encounter this kind of problem, I am really at a loss, but I can't help it if I am impatient. The following editor will give you a brief introduction to the computer microphone test method. When you encounter such a problem, try to operate the test to make your video call communication barrier-free.
First of all, we need to check whether the microphone is connected to the computer normally, how to check whether the computer is connected to the microphone, the steps are briefly as follows:
Right-click the sound icon (that is the little speaker) in the lower right corner of the computer, click "Sound" in the pop-up, and in the pop-up sound interface, select "Record"-select "Microphone", click the properties below-in "Microphone Properties" Click on the "listening" setting interface, and check "listen to this device"! (Reminder: level setting-you can adjust the volume of the microphone).
Reminder: Everyone needs to check if it is plugged in the wrong place. If the microphone is connected to the pink jack and the microphone still has no sound, the problem still exists. Next, check what is causing the sound to disappear. Next, the editor will give you a specific explanation.
First check whether the microphone has been muted unintentionally, double-click the small speaker in the lower right corner of the screen to open the recording control panel, click "Options" in the panel, select "Properties", and check "Microphone" to see if the microphone is muted. Mute, if it is muted, you can cancel it, and the computer microphone should be able to return to normal. This is the first step to solve the problem of no sound from the microphone
Step 2: If the above method still doesn't work, then you need to check whether the microphone is normal. Operation method: Click "Start", select the "Recording" tool in "Accessories" -> "Entertainment", and then click the "dot" button to start recording. All you have to do is speak into the microphone. If the green horizontal A certain fluctuation of the line indicates that the microphone can work normally. If the green horizontal line does not fluctuate, it must be that the microphone is broken or the sound card is faulty.
Step 3: Test that the microphone can work normally through the above methods, then there is no need to worry about the microphone without sound, it may be that the program used cannot recognize the sound temporarily or the microphone sound is too low, adjust the volume and try again.
The last step: If you find that the microphone still doesn't work normally after passing the test, you can try to connect the microphone to another computer to see if it can work normally. If not, replace it with a good microphone. If the microphone can work normally on someone else's machine, then it is very likely that there is a problem with your computer's sound card driver or sound card hardware (sound card driver or sound card hardware related content can be found on the Tubatu official website).
Through the introduction of the editor, have you mastered the test method of computer microphones? The method is very simple. Just follow the steps of the editor and test it step by step.