SLR external microphone, how to use condenser microphone

How to use SLR external microphone? Many friends who do news have high requirements for external microphones. They should not have too much noise at the bottom, but must be more intelligent. So what kind of SLR external microphone is better?

SLR external microphone: SLR external microphone, news interview microphone, in fact, more hope that the microphone can effectively reduce the relatively low-quality audio circuit noise generated by the camera:

1. Hand-held condenser microphone: firstly, you need to install a DC battery to power the microphone. After installation, push the microphone reed switch to the upper microphone to work. The connection method of the microphone and the sound card is to first connect the XLR end of the microphone cable to the tail of the microphone, and connect the other end of the microphone cable to the microphone input jack of the computer, sound card, mixer, power amplifier and other equipment. To connect mixers, power amplifiers and other equipment, you need a 3.5 to 6.35 adapter.

2. Large, medium and small diaphragm and tube, vacuum tube condenser microphone: This type of microphone is known as a professional recording condenser microphone in the industry. The method of use is to first install the microphone on the shock mount at the front of the stand, then plug one end of the male and female XLR cable into the bottom jack of the microphone, and connect the other end to the phantom power supply or microphone amplifier, mixer, phantom On the XLR interface of the power supply, connect the XLR to 3.5 microphone cable to the phantom power supply and the sound card. After finishing, turn on the power switch of the mixer or mic preamp and phantom power to use.

3. Power-free condenser microphone: This type of microphone is a new type of condenser microphone that has appeared in the last one or two years. Its feature is that it can work without phantom power and battery power, and is very simple to install and use. The method is to connect the XLR end of the microphone cable to the end of the microphone, and plug the other 3.5 plug directly into the microphone input jack of the computer, sound card, phantom power supply or mixer.

USB Microphone:https://www.soft-voice.com/